Being a ‘bypass’ Filter, the LP-Series can be installed on virtually any engine or low pressure application with pressures less than 116 PSI/8 Bar. The oil supply can be obtained from a variety of locations such as an oil pressure point along the oil gallery, oil pressure switch, or oil filter head. Once filtered, the polished oil is returned to the reservoir/pan. Since G2F polishes oil at a very slow flow rate, the installation of the system will in no way impede the operation of the engine or a low pressure system. It does not replace the conventional full-low filtration system – it enhances and works in conjunction with it. As long as the engine or low pressure system is running, the G2F Element will remove contamination and water missed by standard full-flow filters, dramatically prolonging the additive package and the oil with operational safety.