|
|
|
L.B.S. Lubrication Units Inc.
181 Andrew Street
Newcastle, Ontario
Canada L1B 1J9
Tel: (905) 987-2224
Fax: (905) 987-3334
1-800-960-3848
info@generation2filtration.com
|
|
 |
 |
|
 |
|
|
|
|
|
 |
|
|
|
|
|
Generation 2™ elements remove water at 99.97% from oil, dramatically decreasing the formation of acids, diminishing the accelerated depletion of additives, keeping the Total Base Number (TBN) at a high level. By removing ultra-fine particles down to 1 micron, there is significantly less of a burden placed on the additives with less dirt to suspend... |
|
|
|
|
|
 |
|
 |
|
|
|
|
|
 |
|
|
|
|
|
Being a 'by-pass' Filter, G2F can be installed on virtually any hydraulic system. Oil supply can be obtained from a pressure point off the pump or main manifold block. Once Filtered, the polished oil is returned to the reservoir at atmospheric pressure. Since G2F polishes oil at a very low flow rate, installation of the Filter will not impede the operation of ... |
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
G2F is a low cost 'Proactive' maintenance asset management tool reducing long-term maintenance costs, while providing short-term savings on oil, standard Filter, downtime, waste oil and offering quick return on the capital investment. Common problems can be identified by the condition of the G2F element capital investment. |
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
Designed to clean oil fast and continuously, our portable filtration carts can Filter out ultra-fine contamination down to 1-micron with 99.97% water removal. We have a variety of carts to accommodate a wide range of flow rates and applications, including reclaiming industrial fluids such as: hydraulic oils, synthetic oils, lubricating oil, drawing oil, cutting oils.... |
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
Water Glycol has many critical functions. The fluid is used to transmit power, lubricate, seal and transfer heat. As it is used and reused it begins to absorb contaminants such as chips, fines, and bacteria. As these contaminants build up and pass through the hydraulic system, problems will start to occur. Valves will start to leak, orifices and ports will get... |
|
|
|
|
|
|
|
|
